Part 5: Cooking Advices; Pan Quality; Pan Dimension - Philco PHD 61FS Owner's Manual

PART 5: COOKING ADVICES

Pan quality

Adapted materials:
Not adapted materials:
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
· Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water must heat in a
few seconds.
· A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise doesn't mean
any failure on the appliance and doesn't influence the cooking operating.

Pan dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the corresponding cooking
zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking zone.
Copyright © 2019, Fast ČR, a. s.
steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium
with ferromagnetic bottom.
aluminium and stainless-steel without ferromagnetic bottom, cupper, brass,
glass, ceramic, porcelain.
EN - 13
Revision 08/2019