Timer - Philco PHD 61FS Owner's Manual

Timer

The timer is able to be used simultaneous with all heating zones and this with different time settings (from 0
to 99 minutes) for each heating zone.
· Setting and modification of the cooking time:
Example for 16 minutes at power 7:
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
The time is confirmed and the cooking starts.
· To stop the cooking time:
Example for 13 minutes at power 7:
Action
Zone selection
Select « Timer »
Deactivate the units
Valid the units
Deactivate the tens
Valid the tens
· Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
· Egg timer function:
Example for 29 minutes :
Action
Activate the hob
Select « Timer »
Set the units
Valid the units
Set the tens
Valid the tens
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer display will blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.
Copyright © 2019, Fast ČR, a. s.
Control panel
Press display [ 0 ]
Slide on the "SLIDER" to [ 7 ]
Press display [ CL ]
Slide on the "SLIDER" to [ 6 ]
Press display [ 06 ]
Slide on the "SLIDER" to [ 1 ]
Press display [ 16 ]
Control panel
Press display [ 7 ] selected
Press key [ 13 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 10 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 00 ]
Control panel
Press display [ 0/I ]
Press display [ CL ]
Slide on the "SLIDER" to [ 9 ]
Press display [ 09 ]
Slide on the "SLIDER" to [ 2 ]
Press display [ 29 ]
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 ] fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]
Display
[ 0 ] and control light on
[ 13 ]
[ 1 fixed ] [ 0 blinking ]
[ 1 blinking ] [ 0 fixed ]
[ 0 blinking ] [ 0 fixed ]
[ 00 ]
Display
Zone control lights are on
[ 00 ]
[ 0 fixed ] [ 9 blinking ]
[ 0 blinking ] [ 9 fixed ]
[ 2 blinking ] [ 9 fixed ]
[ 29 ]
EN - 11
Revision 08/2019