Reverse Handle; Free Wheel Lever; Blade Lever - Billy Goat BC26 Operator's Manual

12

Reverse Handle

Fits: Hydro-drive units
Use the reverse handle (A, Figure 13) on the left to maneuver
the unit in a reverse direction. Slowly squeeze the handle,
while walking backwards to achieve reverse motion. To stop
reverse motion, let go of the handle completely.
13

Free Wheel Lever

Fits: Hydro-drive models
Use the Free Wheel Lever (A, Figure 14) to push the unit by
hand. Pull out the lever to disengage drive-enabled motion.
This will allow you to transport and push the unit by hand.
Push the lever in to engage drive-enabled motion. Refer to
decal 501504 (Figure 15)for more information.
14
15

Blade Lever

The blade lever engages the blade, causing the blade to spin
and cut brush. To engage the blade, completely depress the
blade lever (A, Figure 16). To disengage the blade, release
the blade lever (A, Figure 17).
7