Installing The Front Guard Bar; General Setup - Billy Goat BC26 Operator's Manual

3
4. Use cable ties to secure any loose cables to the handle
assembly.

Installing the Front Guard Bar

Fits: All models except models with caster wheels.
1. Locate the front guard bar (A, Figure 4) and remove any
packaging materials.
4
4
2. Install the front guard bar onto the front left and right skid
bars (B). Use the bolts (C), washers (D), and nuts (E) to
secure the guard bar to the skid bars.

General Setup

Your unit was shipped in a box or wooden crate. Remove the
unit from the carton and remove all packaging.
1. Verify all cables are secured to the handlebars with metal
conduit clamps and/or plastic cable ties.
2. Check the engine oil level. Fill if necessary.
3. Check the engine fuel level and fill if necessary.
4. Electric models only: Secure the battery in the battery
plate. Hook one side of the strap into the hole, then
stretch the strap across the top of the battery and hook
the opposite side into the opposing hole on the plate. Be
sure the battery is secure, then connect terminals.
5. Read the General Safety Manual to familiarize yourself
with safety topics related to the unit and prepare yourself
for operation.
billygoat.com