Cisco NCS 1010 Install page 8

Install Line Card
Figure 7: Cisco NCS 1010 Chassis
1
2
Figure 8: Inserting the Line Card
1
2
3
Step 3 Insert the line card into the chassis.
Caution
Install Cisco NCS 1010 Modules
8
Use the handle only to push and pull out the line card from the chassis. Do not use the handle to
carry the line card. To prevent any accidental drop, support the top and bottom of the line card with
your hand while you remove or insert it.
Install Cisco NCS 1010 Modules
Backplane connector
Slide Guides
Grooves
Handle
Captive Screws (Two captive screws on each side of
the line card)