Cisco NCS 1010 Install page 10

Install Fan Tray
Figure 10: Rear View of the Fan Tray
1
Step 2 Holding the handles with both hands, insert the fan tray into the slot on the front side of the chassis.
Figure 11: Inserting a Fan Tray
1
2
Step 3 Using the screw driver, tighten the captive screws at the corners of the fan tray, to a torque value 0.65 N-m
(5.75 lbs-in).
Install Cisco NCS 1010 Modules
10
Guide pin
Fan tray
Captive screw
Install Cisco NCS 1010 Modules