Advertisement
Install Cisco NCS 1010 Modules
The left captive screw goes into the chassis and the right captive screw goes into the line card.
Step 4
Repeat the preceding steps to insert and fix the second fan tray.
Install Fan Filter
Use this task to assemble the fan filter on the Cisco NCS 1010 chassis.
Procedure
Step 1
Align the four captive screws in the fan filter with the respective standoffs in the fan trays. Check for the This
Side Up label.
Figure 12: Installing the Fan Filter
1
2
Step 2
Tighten the captive screws using the screwdriver to a torque value of 0.65 N-m`(5.75 lbs-in).
Fan filter
Captive screw
Install Cisco NCS 1010 Modules
Install Fan Filter
11
Advertisement
