Cisco NCS 1010 Install page 4

Connect DC Power to Cisco NCS 1010
Figure 3: Connecting AC Power Cable
1
Step 3
Close the cable retention clips to secure the power cables and to prevent their accidental removal.
Connect DC Power to Cisco NCS 1010
Caution
Install Cisco NCS 1010 Modules
4
Cisco NCS 1010 relies on the protective devices in the building installation to protect against short circuit,
overcurrent, and ground faults. Ensure that the protective devices comply with local and National Electrical
Codes.
Install Cisco NCS 1010 Modules
AC power cable