Operation Instructions - German pool PAC-CH309 User Manual

Operation Instructions

Control Panel
Icon Description
On/Off Button
Timer Button
Timer Indicator
Light
Sleep Mode
Indicator Light
Cool Mode Indicator
Light
Turn On The Product
1. Connect product to the power source. Buzzer beeps once, control panel lights up for 1 second
then turns dark, LED display shows current room temperature, and product enters standby state.
2. Press On/Off Button
and High Fan Speed.
3. After using the product, press On/Off Button
standby state, product will still be connected to power).
Note:
This product has built-in memory. When user presses On/Off Button
time the product is turned on again, it will run in the previous setting. If the product is unplugged, the
next time it is plugged in and turned on again, it will run in the factory default setting.
Icon Description
Mode Button
Fan Speed Button
High Fan Speed
Indicator Light
Water Full Indicator
Dehumidify Mode
Indicator Light
to turn on the product; by factory default, product runs in Cool Mode
P.10
Icon
Light
to turn off the product (product only returns to
to turn off the product, next
Description
Increase Button
Decrease Button
Low Fan Speed
Indicator Light
Warm Mode
Indicator Light
Fan Mode Indicator
Light