Table of Contents
Advertisement
Video Power Down
Hard Disk Power Down
Standby/Suspend
Time Out (Minute)
Throttle Slow Clock
FDC/LPT/COM Ports When FDC/LPT/COM is Monitor, any activity from
MIDI Ports This item allows you to configure MIDI Port.
Primary/Second
Master/Slave IDE
Power Button Function This option specifies how the power button mounted
Restore on AC/Power
This option specifies the power conserving state that
the hard disk enters after the specified period of hard
Mode
drive inactivity has expired.
When enabled and after the set time of system
Mode
inactivity, the Hard Disk drive will be powered down
while all other devices remain active.
The option specifies the length of a period of Hard
disk drive inactivity. When this length of time
expires the system enters power conserving state
in the "Hard Disk Power Down Mode".
Please leave this field at default setting.
Ratio
one of the listed system peripheral devices or IRQs
wakes up the system.
The Choices: 300H(default); 330H.
This option allows you to Disable to Enable on board
Primary/Second IDE controller.
externally on the computer chassis is used.
This function allows you to set whether or not to
Loss
restart the system after power interruptions.
Chapter 4 BIOS Setup
63
Advertisement
Table of Contents
