Table of Contents
Advertisement
16.
CHIP CONVEYOR(OPTION)
This is the device to extract the chip that is generated in machining to the outside of
machine. Basically in the lateral side of electric control cabinet, the connector is prepared to
attach chip conveyor.
Classification
Chip conveyor
In case of attaching chip conveyor by customer oneself, attach chip conveyor after consulting
with DHIM.
16.1
Chip conveyor operation
The next operating explanation is only for attaching chip conveyor of DHIM. In case of
another chip conveyor, operation method may be different with explanation listed below.
(1) Manual operation
Manual operation panel of chip conveyor is attached to the chip conveyor.
Forward operation switch
Reverse operation switch
Stop switch
Operation is available regardless of the operation mode of machine, but the machine
must be in the status listed below.
- Machine ready status
- The status that the front door is closed.
(2) Automatic operation
Chip conveyor can be operated using M-code listed below.
M24 ; Conveyor forward rotation
M25 ; Conveyor stop
And operation method may be different according to the setting of machine data.
MD
14512[11].1
Spec. of connector in box
MS3102A 22-14S
: Chip conveyor will be rotated in the forward direction.
: Chip conveyor will be rotated in the reverse direction.
: Chip conveyor will be stopped.
After commanding M24, additional command such as M25 is
Set to "0"
required in order to stop conveyor
After command M24, additional command isn't required in
Set to "1"
order to stop conveyor. The conveyor will stop automatically
after the time set in machine data parameter elapsed.
Wiring No.
Standard/Option
WM0610
OPERATION | 79
Option
Advertisement
Table of Contents
