Table of Contents
Advertisement
4.
Service Planner
With the "Service Planner", maintenance tasks have been set up that have to be performed
at certain interval (e.g. change coolant).
A list is displayed of all the maintenance tasks that have been set up together with the time
remaining until the end of the specified maintenance interval.
The current status can be seen in the status display.
Messages and alarms indicate when a task has to be performed.
Acknowledging a maintenance task
Acknowledge the message when a maintenance task has been completed.
Display
Pos
Maintenance task
Interval [h]
Remaining time [h]
Status
Position of the maintenance task in the PLC interface.
Name of the maintenance task
Maximum time until next servicing in hours
Time until the interval expires in hours
Display of the current status of a maintenance task
The maintenance task has been started
The maintenance task is completed
The maintenance task is deactivated
Meaning
MAINTENANCE | 139
Advertisement
Table of Contents
