Service And Maintenance; Basic Safety Notes; Maintenance - Siemens SITRANS SCM IQ Compact Operating Instructions

Service and maintenance

6.1

Basic safety notes

Note
The device is maintenance-free.
6.1.1

Maintenance

The device is maintenance-free. However, a periodic inspection according to pertinent directives
and regulations must be carried out.
An inspection can include:
• Ambient conditions
• Seal integrity of the process connections, cable entries, and cover
• Reliability of power supply, lightning protection, and grounds
Dust layers above 5 mm
Risk of explosion in hazardous areas.
Device may overheat due to dust build up.
• Remove dust layers in excess of 5 mm.
Use of a computer in a hazardous area
If the interface to the computer is used in the hazardous area, there is a risk of explosion.
• Ensure that the atmosphere is explosion-free (hot work permit).
NOTICE
Penetration of moisture into the device
Damage to device.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA
WARNING
WARNING
the inside of the device.
6
45