BCPX3 Evalution Kit J80D1 RTK0EE0007D01001BJ
3.Interface Specifications
2.2.2
How to Select Drive System
The PLC board has two transmission output types; CPX3 direct drive (hereinafter referred to as CPX drive)
and CPX3+PA drive (hereinafter referred to as PA drive). The PA is used for evaluation with many kits or
longer communication range, with the output level 20dB larger than the CPX drive. Figure 2-8 shows the
setting parts for selecting the drive system and Table 2-3 shows the setting condition.
Figure 2-8 Setting parts for selecting drive system
R30UZ0098EJ0100 Rev.1.00
Page 32 of 53
Oct 01, 2107