BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ
3.Interface Specifications
How to Select Drive System
2.2.2
The PLC board has two transmission output types; CPX3 direct drive (hereinafter referred to as CPX drive)
and CPX3+PA drive (hereinafter referred to as PA drive). The PA is used for evaluation with many kits or
longer communication range, with the output level 20dB larger than the CPX drive. Figure 2-5 shows the
setting parts for selecting the drive system and Table 2-3 shows the setting condition.
Figure 2-5 Setting parts for selecting drive system
R30UZ0099EJ0100 Rev.1.00
Page 30 of 46
Oct 01, 2017