System Library Image; Figure 42: Mask Rom; Figure 43: Bootloader Prompt On Command Window; Figure 44: Load Image File - Renesas DA16200 User Manual

UM-WI-023
DA16200 ThreadX Evaluation Kit
If you get a new SDK, then always load the <Bootloader image> first.
1. Power on the DA16200 board.
2. At the [/DA16200] prompt, type reset to go to the Mask ROM prompt [MROM]. See
3. At the [MROM] prompt, type loady boot. See

Figure 43: Bootloader Prompt on Command Window

4. Choose menu File > Transfer > YMODEM > Send to select the image file for the Bootloader.
See Figure 44.
○
For example: DA16200_BOOT_GEN01-01-XXXX-_IS25WP016D.img
○
The result is printed at the end of the transfer
Please ignore any messages like "err:.."

11.4 System Library Image

The <System Library image> includes system libraries, RF drivers, and libraries to operate the DPM.
User Manual
CFR0012

Figure 42: Mask ROM

Figure 43.

Figure 44: Load Image File

Revision 2.3
42 of 58
Figure 42.
16-Sep-2022
© 2022 Renesas Electronics