Renesas RTK0EE0007D03001BJ User Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Motherboard
  5. RTK0EE0007D03001BJ
  6. User manual
Renesas RTK0EE0007D03001BJ User Manual

Renesas RTK0EE0007D03001BJ User Manual

Plc modem lsi r9a06g037 bcpx3 evaluation kit j80d2
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cover
BCPX3 Evaluation Kit J80D2
RTK0EE0007D02001BJ
16
RENESAS
PLC Modem LSI R9A06G037
All information contained in these materials, including products and product specifications, represents
information on the product at the time of publication and is subject to change by Renesas Electronics
Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
through various means, including the Renesas Electronics Corp. website (http://www.renesas.com).
www.renesas.com
User's Manual
Rev.1.00 Oct 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RTK0EE0007D03001BJ and is the answer not in the manual?

Questions and answers

Related Manuals for Renesas RTK0EE0007D03001BJ

Summary of Contents for Renesas RTK0EE0007D03001BJ

  • Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
  • Page 2 Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
  • Page 3 General Precautions in the Handling of MPU/MCU Products The following usage notes are applicable to all MPU/MCU products from Renesas. For detailed usage notes on the products covered by this manual, please refer to the relevant sections of the manual.
  • Page 4 ** Note) About representation of the model name A model name of the kit including accessories is "RTK0EE0007D01001BJ". (It is displayed on a box.) A model name of the PLC board is "RTK0EE0007D03001BJ". (It is displayed on the board.)
  • Page 5 (2) In no event shall Renesas Electronics Corporation be liable for any consequence arising from the use of this product.
  • Page 6 Renesas or to a third party. This document and this product (BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ) are copyrighted, with all rights reserved by Renesas. This document may not be copied, duplicated or reproduced, in whole or part, without prior written consent from Renesas.
  • Page 7 Precautions for Safety In this document, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly.
  • Page 8  Do not touch the high voltage area during live operation for debugging, probing, or any other purpose.  Renesas Electronics bears no responsibility for any consequences that may result from the improper or hazardous use of this board.
  • Page 9 Warning for Installation：  Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling water or some other liquid into the product may cause unrepairable damage. Warning for Use Environment： ...
  • Page 10 After use the equipment cannot be disposed of as household waste, and the WEEE must be treated, recycled and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life equipment, register for...
  • Page 11 How to Use This Manual 1. Purpose and Target Readers This manual is designed to provide the user with an understanding of the hardware functions and electrical characteristics of the evaluation board. It is intended for users designing applications and systems based on the board.
  • Page 12 List of Abbreviations and Acronyms Full Form Abbreviation Analog Front End ARIB Association of Radio Industries and Broadcast Federal Communications Commission Ground Potential Media Access Control Layer Micro Controller Unit On Chip Debugger OFDM Orthogonal Frequency Division Multiplexing Power Line Communication Physical Layer Service Access Point Switch...

  • Page 13: Table Of Contents

    Table of Contents Product Overview ............................15 Board Configuration ............................15 PLC evaluation software configuration ......................20 Descriptions on Main Body Parts ........................21 Required Items for Evaluation DC PLC Communication ................. 25 Usage ................................26 How to set SW and JP............................26 DC PLC Communication Usage ........................
  • Page 14 3.3.1 Power Supply Connector (CN21: Silk Display PWR_IN)............... 41 3.3.2 Communication Line Connector (CN20: Silk Display PWR_OUT(PLC)) ..........41 3.3.3 Power Supply Mode Setting Jumper (JP1/JP13) ..................41 3.3.4 GND Pin TP(TP8) ........................... 41...

  • Page 15: Product Overview

    Product Overview The BCPX3 Evaluation Kit J80D2 is a tool to evaluate DC power line communication (hereinafter referred to as DC PLC) for system evaluation and software development with Renesas PLC modem LSI R9A06G037(CPX3). This chapter explains the board configuration and the usage of this product.
  • Page 16 Table 1-1 The List of product specifications Product BCPX3 Evaluation Kit J80D2 Model number RTK0EE0007D02001BJ PLC modem device CPX3 (R9A06G037: Renesas) Control MCU RL78/G13 (R5F100GLAFB#V0: Renesas) AFE device ISL15110 (Intersil) : Power amp(hereinafter referred to as PA) + RCV amp, RX Step ATT : discrete Supported frequencies: 35kHz –...
  • Page 17 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Table 1-2 Communication performance example Drive system CPX3 direct drive CPX3+PA drive The number of connected 64 boards (*2) (*3) (*4) 128 boards (*2) (*3) (*4) boards Communication range 800m (*2) (*3) (*4) 1.6km (*2) (*3) (*4) Power line feeding voltage DC16 to48V...
  • Page 18 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications (*3) Connection example of Line topology In case of CPX drive 駆動の場合 In case of PA drive Figure 1-2 Connection example of Line topology (*4) Connection example of Star topology In case of PA drive In case of CPX drive 駆動の場合...
  • Page 19 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 1-4 Termination circuit example ・The communication range and number of connected boards (Table 1-2) were confirmed under (*2) (*3) (*4) conditions. ・When the connection method is different, it may be different from the above result. ・It is recommended to add the termination circuit to transmission and receiving end to suppress influence of the reflection of the cable.

  • Page 20: Plc Evaluation Software Configuration

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications PLC evaluation software configuration Figure 1-5 shows PLC evaluation software configuration(PHY evaluation tool： SimpleMAC)configuration of CPX3 (PLC modem LSI R9A06G037) . The SROM on the PLC board is programmed with the FW supporting SimpleMAC, which enables the user to control CPX3 with the PC using SimpleMAC GUI.

  • Page 21: Descriptions On Main Body Parts

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Descriptions on Main Body Parts Figure 1-6, Table 1-7 shows the block diagram of this product. Details for each connector, JP, SW and VR are shown in Figure 1-8, Figure 1-9, and Figure 1-10. Figure 1-6 PLC board, RL78 MCU board Function block diagram Figure 1-7 Power Filter Board Function block diagram R30UZ0099EJ0100 Rev.1.00...
  • Page 22 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 1-8 PLC board connector, JP, and SW Table 1-3 PLC board connector, JP, and SW applications Connector/JP/SW Applications SW2, SW3, SW4, JP and SW for switching drive system JP2, JP3, JP4, JP5, JP6, JP14, JP15, JP16 SW for selecting boot setting(No.4) / SROM connection (No.1-3,5-8) SW for selecting UART-USB connection...
  • Page 23 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 1-9 RL78 MCU board connector and SW Table 1-4 RL78 MCU board, connector and SW applications Connector/SW Applications SW8, SW9 General-purpose DIP SW for RL78 CN18, CN19 PLC board connector CN12 OCD connector R30UZ0099EJ0100 Rev.1.00 Page 23 of 46 Oct 01, 2017...
  • Page 24 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 1-10 Power Filter Board connector, JP and TP Table 1-5 Power Filter Board connector, JP, and TR applications Connector/JP Application Select whether to insert or not insert a condenser for the power supply filter on the power supply line (-) JP13 Select whether to insert or not insert an inductor for the power supply filter on the power supply line (-)

  • Page 25: Required Items For Evaluation Dc Plc Communication

    (*2) Required when using RL78 MCU board. Table 1-7 SW to be prepared Product name Notes Renesas flash programmer Download from the Renesas website. Simple MAC GUI Download from the Renesas website. Virtual serial port driver Refer to Chapter 3.1.9 R30UZ0099EJ0100 Rev.1.00...

  • Page 26: Usage

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Usage This chapter explains how to set of SW and JP and use each board. How to set SW and JP Table 2-2 shows the setting at the time of the shipment of SW and JP of each board. Table 2-1 How to set SW and JP of each board Setting at the time How to set SW and JP...

  • Page 27: Dc Plc Communication Usage

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications DC PLC Communication Usage DC Power Supply Setting 2.2.1 Table 2-2 shows how to supply DC power to the PLC board and JP9 settings available for each condition. Figure 2-2 shows the power supply configuration from the communication line, Figure 2-3 shows power supply configuration from the AC adaptor, and Figure 2-4 shows the power supply configuration from the communication line and AC adaptor.
  • Page 28 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 2-2 Condition 1: PC board connection example of DC power supply from the communication line Figure 2-3 Condition 2: PC board connection example of DC power supply from the AC adaptor (1) R30UZ0099EJ0100 Rev.1.00 Page 28 of 46 Oct 01, 2017...
  • Page 29 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 2-4 Condition 3: PC board connection example of DC power supply from the AC adaptor (2) R30UZ0099EJ0100 Rev.1.00 Page 29 of 46 Oct 01, 2017...

  • Page 30: How To Select Drive System

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications How to Select Drive System 2.2.2 The PLC board has two transmission output types; CPX3 direct drive (hereinafter referred to as CPX drive) and CPX3+PA drive (hereinafter referred to as PA drive). The PA is used for evaluation with many kits or longer communication range, with the output level 20dB larger than the CPX drive.

  • Page 31: Dc Plc Communication Using Simplemac Function

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Table 2-3 Drive system setting condition Target connector/JP/SW Setting Condition PA：CPX3 output→PA→transmission output CPX：CPX3 output→transmission output PA：Connect the TXENB/RXSATT signal to ISL15110 CPX：Specify TXENB=High / RXSATT=Low PA：Reception input →RCV Amp→CPX3 input CPX：Reception input →CPX3 input JP2, JP3 PA：Select CPX3 output CPX：Select PA output...

  • Page 32: Interface Specifications

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Interface Specifications This chapter explains the interface specifications of this product. PLC Board This chapter explains interface specifications for the PLC board. LED (LED1, LED2, LED3, LED4) 3.1.1 The PLC board has the following LED modes to indicate the state. ・LED for PLC modem LSI signal：2 LEDs to indicate the PLC modem LSI state ・LED1：Lights on during packet reception ・LED2：Lights on during packet transmission...

  • Page 33: Jumper/Switch For Selecting Drive System

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Jumper/Switch for Selecting Drive System 3.1.5 Figure 3-1 shows parts used for switching drive system. You can change the drive system by selecting parts in a red square (□). The JP and SW should be set on the PA side for Power am driving method, or set them on the CPX side for CPX3 direct drive.

  • Page 34: Dip Switch For Boot Setting And Srom Connection (Sw1)

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Table 3-2 SW6 setting for enabling/disabling MCU (RL78) MCU control SW6 setting Function Reset state KILL MCU(RL78) in the reset statue (Default setting) CPX3 reset controlled by SW7 Operation state MCU(RL78) in the operation state CPX3 reset controlled by MCU (RL78) DIP Switch for Boot Setting and SROM Connection (SW1) 3.1.8...

  • Page 35: Mcu Board Connector

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications MCU Board Connector 3.1.10 Table 3-5 and Table 3-6 show the pin assignments of the MCU board. Table 3-5 CN6 connector PIN No. Pin name Function Connected to GND AN000 Connected to CN5-2 Connected to CN5-3 Connected to CN5-4 Connected to GND...

  • Page 36: Extension Board Connector

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Extension board Connector 3.1.11 Table 3-7 shows pin assignments of the extension board. Table 3-7 CN5 connector PIN No. Pin name Function Connected to GND AN000 Connected to CN6 - AN000 Connected to CN6 – SDA (*1) Connected to CN6 –...

  • Page 37: Rl78 Mcu Board

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications RL78 MCU board This chapter explains interface specifications for the RL78 MCU board. General-purpose DIP SW for MCU (RL78) (SW8, SW9) 3.2.1 SW1 is a DIP switch to select the RL78 application. When it is ON, the RL78 signal level is LOW, or HIGH when it is OFF.

  • Page 38: Led (Led5 / Led6)

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Table 3-8 OCD connector(CN12) PIN No. Pin name Function Open (not connected) Open (not connected) RSTPU Open (not connected) TOOL0 RL78-TOOL0 Open (not connected) Open (not connected) 3.3V EMVDD 3.3V RESET RL78- RESET Open (not connected) RESET RL78- RESET...

  • Page 39: Control Mcu(Rl78)

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Control MCU(RL78) 3.2.5 The RL78 MCU board is equipped with RL78 for PLC control. The following table shows the control MCU terminal connection information. For unused pin settings, set the ports to “Input” since the signals connected to CPX3 have the pin assignments on the CPX3.

  • Page 40: Plc Board Connector (Cn10 / Cn11)

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications PLC board connector (CN10 / CN11) 3.2.6 Table 3-10 and Table 3-11 show pin assignments of the RL78 MCU board and the PLC board. Table 3-10 CN10 connector PIN No. Pin name Function Connected to GND AN000 Connected to RL78 - P147/ANI18...

  • Page 41: Power Filter Board

    BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Power Filter Board This chapter explains interface specifications for the Power Filter Board. Power Supply Connector (CN21: Silk Display PWR_IN) 3.3.1 Connect the power supply connector (CN21) on the power supply side. Communication Line Connector (CN20: Silk Display PWR_OUT(PLC)) 3.3.2 Connect the communication connector (CN20) on the communication line (DC PLC evaluation kit connection)
  • Page 42 BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ 3．Interface Specifications Figure 3-3 Connector, JP and TP for Power Filter Board R30UZ0099EJ0100 Rev.1.00 Page 42 of 46 Oct 01, 2017...
  • Page 43 Revision history BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ User’s Manual Rev. Date Description Page Summary － 1.00 Oct 01, 2017 First edition Issued...
  • Page 44 Colophon BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ User’s Manual Publication Date Oct 01, 2017 Rev.1.00 Published by: Renesas Electronics Corporation...
  • Page 45 SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3...
  • Page 46 Back Cover BCPX3 Evaluation Kit J80D2 RTK0EE0007D02001BJ R30UZ0099EJ0100...

Table of Contents