Renesas RTK0EE0009D01001BJ User Manual
  1. Manuals
  2. Brands
  3. Renesas Manuals
  4. Motherboard
  5. RTK0EE0009D01001BJ
  6. User manual
Renesas RTK0EE0009D01001BJ User Manual

Renesas RTK0EE0009D01001BJ User Manual

Cpx4 dc-plc evaluation kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cover
CPX4 DC-PLC Evaluation Kit M01D1
RTK0EE0009D01001BJ
16
RENESAS
PLC Modem LSI R9A06G061
All information contained in these materials, including products and product specifications, represents
information on the product at the time of publication and is subject to change by Renesas Electronics
Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
through various means, including the Renesas Electronics Corp. website (http://www.renesas.com).
www.renesas.com
User's Manual
Rev.1.00 July 01, 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RTK0EE0009D01001BJ and is the answer not in the manual?

Questions and answers

Related Manuals for Renesas RTK0EE0009D01001BJ

Summary of Contents for Renesas RTK0EE0009D01001BJ

  • Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
  • Page 2 Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
  • Page 3 Unit Products The following usage notes are applicable to all Micro processing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products.
  • Page 4 (2) In no event shall Renesas Electronics Corporation be liable for any consequence arising from the use of this product.
  • Page 5 Renesas or to a third party. (3) This document and this product CPX4 DC-PLC Evaluation kit M01D1 (RTK0EE0009D01001BJ) are copyrighted, with all rights reserved by Renesas. This document may not be copied, duplicated or reproduced, in whole or part, without prior written consent from Renesas.
  • Page 6 Precautions for Safety In this document, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly.
  • Page 7 ⚫ Do not touch the high voltage area during live operation for debugging, probing, or any other purpose. ⚫ Renesas Electronics bears no responsibility for any consequences that may result from the improper or hazardous use of this board.
  • Page 8 Warning for Installation： ⚫ Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling water or some other liquid into the product may cause unrepairable damage. Warning for Use Environment： ⚫...
  • Page 9 After use the equipment cannot be disposed of as household waste, and the WEEE must be treated, recycled and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life equipment, register for...
  • Page 10 ** Note) About representation of the model name A model name of the kit including accessories is "RTK0EE0009D01001BJ". (It is displayed on a box.) A model name of the PLC board is "RTK0EE0009D03001BJ". (It is displayed on the board.)
  • Page 11 How to Use This Manual 1. Purpose and Target Readers This manual is designed to provide the user with an understanding of the hardware functions and electrical characteristics of the evaluation board. It is intended for users designing applications and systems based on the board.
  • Page 12 List of Abbreviations and Acronyms Abbreviation Full Form Analog Front End Federal Communications Commission Ground Potential Media Access Control Layer Micro Controller Unit On Chip Debugger OFDM Orthogonal Frequency Division Multiplexing Power Line Communication Physical Layer Service Access Point Software firmware UART Universal Asynchronous Receiver/Transmitter...

  • Page 13: Table Of Contents

    Table of Contents Product Overview ............................15 Board configuration ............................15 Circuit function block diagram ......................... 17 To begin evaluating DC-PLC communications ....................19 1.3.1 Items required for DC-PLC communication Evaluation................19 HOW TO USE ............................. 20 How to supply DC voltage to DC-PLC board ....................20 Connecting Communication Lines ........................
  • Page 14 3.3.5 GND pin TP (TP201) ..........................39 PMOD conversion board ..........................39 Appendix ..............................41 DC-PLC board communication performance guideline (Reference) ..............41...

  • Page 15: Product Overview

    PMOD conversion board: Pmod ™ connector female-male conversion board Figure 1-1 CPX4 DC-PLC Evaluation Kit Board Configuration The model name of the kit including the accessories is "RTK0EE0009D01001BJ" (display on the outer box). The individual model names for each board are shown in Table 1-1.
  • Page 16 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Table 1-2 List of specifications Product name CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ Product Model Number RTK0EE0009D01001BJ PLC modem device CPX4 (R9A06G061) Control MCU RX651 (R5F5651EHDFP) AFE Devices ISL15102 (Intersil) : Power Amp (hereinafter, PA) + RX Step ATT : discrete...

  • Page 17: Circuit Function Block Diagram

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Circuit function block diagram The circuit function block diagram of this product is shown in Figure 1-2, Figure 1-3, Figure 1-4, Figure 1-5. Figure 1-2 DC-PLC Board Block Diagram Figure 1-3 RX651 MCU Board Block Diagram R30UZ0164EJ0100 Rev.1.00...
  • Page 18 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Figure 1-4 Power Filter Board Block Diagram Figure 1-5 PMOD Conversion Board Block Diagram R30UZ0164EJ0100 Rev.1.00 Page 18 of 53 July 01, 2021...

  • Page 19: To Begin Evaluating Dc-Plc Communications

    Obtain the latest version of the PHY-evaluation tool (CPX4 SimpleMAC GUI) and various manuals from the download site that Renesas informed when the user registered as the PLC user. Information such as circuit diagrams and the latest version of the bill of materials can also be obtained if necessary. For the download site, refer to the "Precautions for Use"...

  • Page 20: How To Use

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications HOW TO USE This chapter describes how to use DC-PLC board. For descriptions of the connectors, SWs and JPs parts of each board, refer to Chapter 3 Interface specifications and SW/JP switching.

  • Page 21: Connecting Communication Lines

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Connecting Communication Lines Connect DC-PLC boards through CN2, CN3. To apply DC voltage to the communication line, connect the power filter board between the power supply and the communication line. The Power filter board functions as an impedance upper function and a filter function for removing PLC signals for the DC power supply source.
  • Page 22 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Figure 2-4 Connection example when no voltage is applied to communication line (Board power is supplied from AC adapter) R30UZ0164EJ0100 Rev.1.00 Page 22 of 53 July 01, 2021...

  • Page 23: Selection Of Drive Method

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Selection of drive method For DC-PLC board, two types of PLC-signal drive methods can be selected: CPX4 direct drive (hereafter CPX drive) and CPX4+PA drive (hereafter PA drive). Figure 2-5 shows the differences between the drive methods.
  • Page 24 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Table 2-2 Drive method settings Target connectors, JP, SW CPX drive setting PA drive setting CPX side PA side CPX side PA side CPX side PA side JP9, JP10 CPX side PA side...

  • Page 25: Methods For Evaluating Dc-Plc Communications Using Cpx4 Simplemac Gui

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Methods for evaluating DC-PLC communications using CPX4 SimpleMAC GUI The evaluation environment of DC-PLC communication using CPX4 SimpleMAC GUI is shown in Figure 2-7. For more information about board set and how to launch CPX4 SimpleMAC GUI, see the manual and the Quick Start Guide of CPX4 SimpleMAC GUI.

  • Page 26: Interface Specifications And Sw/Jp Switching

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Interface specifications and SW/JP switching This chapter describes the interface specifications and SW and JP switching of this product. DC-PLC Board This section explains the interface specifications and SWs/JPs settings of DC-PLC board.

  • Page 27: Led (Led1, Led2, Led3, Led4)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Table 3-1 Usages of connectors, JPs, and SWs for DC-PLC board Connector, JP, SW name SW3, SW4, SW5, JP9, JP10, JP11, JP12 JPs and SWs for drive method switching SW9, SW10 SWs for boot setting switching...

  • Page 28: Jp(Jp13, Jp15) That Connect The Line Power Supply And The Voltage Generator

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.1.5 JP(JP13, JP15) that connect the line power supply and the voltage generator JP13 and JP15 are JPs for connecting the power supply line and the voltage generator when DC power is supplied from the communication line.

  • Page 29: Boot Setting Switch (Sw9, Sw10)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.1.11 BOOT setting switch (SW9, SW10) SW9 and SW10 are set to the selection switch of the BOOT method (UART/SROM/SPI). UART is a BOOT method using UART communication, the SPI is a BOOT method using SPI communication, and SROM is a BOOT method from SROM installed in the evaluation kit.

  • Page 30: Mcu Board-Connection Connector (Cn6, Cn7)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.1.15 MCU board-connection connector (CN6, CN7) Table 3-7 and Table 3-8 show the connection with the RX651 MCU board. Table 3-7 CN6 connectors Terminal Terminal Function number name CPX_RESB Connected to the P0 terminal of CPX4...

  • Page 31: Rx651 Mcu Board

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications RX651 MCU Board This section explains the interface specifications and SWs/JPs setting of RX651 MCU board. 3.2.1 Explanation of Connectors, SWs and JPs of RX651 MCU Boards Figure 3-2 shows the arrangement of the connectors, SWs and JPs, and Table 3-9 shows the usage.

  • Page 32: Led (Led301, Led302)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.2.2 LED (LED301, LED302) LED301, LED302 are LEDs that can be used when developing applications for MCU (RX651). 3.2.3 MCU(RX651) General-purpose DIP-switch (SW301, SW302) These are the DIP SWs (SW301, SW302) with the terminal connections of the MCU (RX651) shown in Table 3-19.

  • Page 33: Ocd-Connector (Cn305)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.2.6 OCD-connector (CN305) The OCD connector (CN305) is a connector for connecting an emulator. When connecting to a development tool via an emulator, set the target power supply to operate with "user power supply", and supply line power or external power to the DC-PLC board.

  • Page 34: Usb Connector (Cn302)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.2.7 USB connector (CN302) The USB connector (CN302) can be used as a USB function. (Refer to the RX651 user manual for details.) Table 3-14 shows the USB connector connection. Table 3-14 CN302 connectors...

  • Page 35: Connectors For Expansion Terminals (Cn300/Cn301)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.2.8 Connectors for expansion terminals (CN300/CN301) Table 3-16 and Table 3-17 show the expansion terminals connected to CN300 / CN301. Table 3-16 CN300 connectors Terminal Terminal name Function number PC0_MCU Connected to RX651-PC0...

  • Page 36: Control Mcu(Rx651)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.2.9 Control MCU(RX651) RX651 MCU board is equipped with RX651 as MCU for control. Table 3-18 and Table 3-19 show the connection information of the control MCU terminals. For unused terminals of the MCU connected to CPX4, set them to the input port. Also, set other unused terminals to the input ports and enable the built-in pull-up function.
  • Page 37 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Table 3-19 RX651MCU terminal connection 2/2 Terminal Terminal name Connection destination Remark (Recommended setting when not in use) number MCU(RX651) side CN304-5 Built-in pull-up when not in use CN300-1 Output HIGH when not in use...

  • Page 38: Power Filter Board

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Power Filter Board This section explains the interface specifications and JPs setting of the power filter board. 3.3.1 Explanation of Connectors, JPs and TP of Power Filter Board Figure 3-4 shows the arrangement of the connectors, JPs and TP, and Table 3-20 shows the usage.

  • Page 39: Power Supply Connector (Cn202: Silk Display Is Pwr_In)

    CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications 3.3.2 Power Supply Connector (CN202: Silk Display is PWR_IN) Connect the power supply connector (CN202) to the power supply side. 3.3.3 Communication line connector (CN201: Silk display is PWR_OUT (PLC)) Connect the communication line connector (CN201) to the communication line (DC-PLC evaluation kit connection) side.
  • Page 40 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Figure 3-5 PMOD conversion board R30UZ0164EJ0100 Rev.1.00 Page 40 of 53 July 01, 2021...
  • Page 41 CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ 3．Interface Specifications Appendix DC-PLC board communication performance guideline (Reference) The following is a guideline for the communication performance of this DC-PLC board. It is described based on the in- house evaluation result. Please note that the results will vary depending on the type of communication line, environment, number of connected devices, etc.
  • Page 42 Revision history CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ User’s Manual Rev. Date Description Page Summary － 1.00 July 01, 2021 First edition Issued...
  • Page 43 Colophon CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ User’s Manual Publication Date: Rev.1.00 July 01, 2021 Published by: Renesas Electronics Corporation...
  • Page 44 Back Cover CPX4 DC-PLC Evaluation Kit M01D1 RTK0EE0009D01001BJ R30UZ0164EJ0100...

This manual is also suitable for:

M01d1Cpx4 dc-plc

Table of Contents