Table of Contents
Advertisement
CCE4503 Evaluation Board User Manual
2. INTRODUCTION
The board is divided into three sections:
●
IO-Link Section
The IO-Link section contains all necessary circuitry to use one CCE4503 (with an adjustable current limit
and slew rate) for IO-Link communication as well as several connectors.
●
Sensor Section
The sensor section contains three different sensors to provide a variety of signals and measurement
capabilities (temperature sensor, color sensor and proximity switch).
●
MCU Section
The MCU section contains an LPC1347 32-bit ARM Cortex-M3 microcontroller from NXP to control the
CCE4503 Device IC as well as the provided sensors.
For maximum flexibility, the sections can be used separately and independently from each other. This allows to
evaluate the CCE4503 Device IC with any suitable sensor application and MCU or both.
The CCE4503 Evaluation Board is delivered with a CCE4503 with 3.3 V LDO.
3. SYSTEM REQUIREMENTS
The CCE4503 Evaluation Board is ready to use with a preinstalled IO-Link Device Stack.
To get started, the following tools are required:
●
Power Supply 24V (IO-Link Master)
●
Debug probe (for programming via SWD)
Feb 28, 2022
Figure 1: System Diagram
Page 2
Advertisement
Table of Contents
