Table of Contents
Advertisement
Available languages
Available languages
EN
SWITCHING ON THE HEATER AND SETTING THE TIME
Turn the mode selector dial to P position and press the
intermittently. Set the hours by pressing
more the
key to store the time. If at any time it is necessary to set the time press the
steps.
FROST PROTECTION MODE
With this mode on, if the room temperature drops below 3ºC the heater will connect itself automatically.
If the display shows the time the heater is in frost protection mode. Press the
mode (time is shown in the display) to standard mode (temperature is shown in the display) and vice versa.
SELECTOR "O", "P", "I".
Position "0":
Position "P":
The heater is following a program. It will maintain the SUN, MOON or
introduced program. At this position if the display shows the time the heater is frost protection mode.
Position "I":
The heater is maintaining the SUN temperature constantly both luminous indicators SUN and MOON
will be lit. This could be useful when SUN temperature is required and we do not want to modify the
program. At this position if the display shows the time the heater is in frost protection mode. Press the
(temperature is shown in the display) and vice versa.
SUN, MOON AND
The electronic programmer is able to handle three temperature levels during the 24h of the day.
Press the
key to set the SUN temperature. The display will show the SUN temperature value blinking.
Set the SUN temperature value by means of the
shows the time the heater is in frost protection mode. Press the
shown in the display) to standard mode (temperature is shown in the display) and vice versa.
Repeat the above steps with the key
The
temperature level is 3ºC and it is a fix value. This temperature level can be used as off selection when setting
the temperatures during curtain times of the day.
SUN, MOON, or
DAILY PROGRAMMES
It is basic to visualize the day split into 48 intervals of 30 minutes each; SUN, MOON, or
allocated to any of them.
The default settings include daily mode so that the heater will repeat the program every day. If different programmes
are required along a week, please see the next step WEEKLY PROGRAMMES. To check a programme or to make a
new one, follow these steps:
+
and
The heater is switched off permanently. The display is switched off.
key to shift from frost protection mode (time is shown in the display) to standard mode
TEMPERATURES
to set the MOON temperature.
temperatures can be allocated to any of the 48 intervals of 30 minutes of the day.
key more than two seconds. The display will show the time
-
keys and press the
. Set the minutes the same way. Press once
+
–
o
keys and press the
key to shift from frost protection mode (time is
17
key and repeat the above
key to shift from frost protection
temperatures as per the
key to store the value. If the display
temperatures can be
Advertisement
Table of Contents
