Subscribe to Our Youtube Channel
Related Manuals for Displays2go ECOSOC66
Summary of Contents for Displays2go ECOSOC66
- Page 1 Assembly Instructions Assembly Instructions E COSOC66 COSOC66 ECOSOC851 1 ECOSOC851 1 ECOSOC1 1 17 ECOSOC1 1 17 tandoff tandoff ignagE ignagE...
- Page 2 E. Allen Key ..........1 Tools required: Power drill, bubble level, hammer, phillips screw driver. Scan QR code to visit product page If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.
- Page 3 Wall Mounting 1. Place your acrylic signage against the wall and make sure the signage is level on the wall. Hold the signage and mark the the center of each hole on the wall. Remove the acrylic signage and drill holes at the marked locations. 2.
- Page 4 3. Attach the printed signage to standoff bases and replace the standoff caps to secure the sigange. The assembly is finished. Tabletop Display 1. Use the cap nut and screw sets to fix standoff bases to the cork backer. Tighten all screws with the allen key provided.
- Page 5 2. Align holes on the printed acrylic with standoff bases, use standoff caps to fix your signage to the cork backer. 3. Choose either protrait or landscape display and insert the acrylic support into the appropriate back slot. 4. The assembly is finished. CONTACT INFORMATION: www.displays2go.com PHONE: 844-221-3388...
Need help?
Do you have a question about the ECOSOC66 and is the answer not in the manual?
Questions and answers