Philco PHD 302 Owner's Manual page 20

Failure code
Ceramic plate temperature sensor failure-
F3/F6
short circuit. (F3 for 1#,F6 for 2#)
Ceramic plate temperature sensor failure-
F4/F7
open circuit. (F4 for 1#,F7 for 2#)
Ceramic plate temperature sensor failure-
F5/F8
invalid . (F5 for 1#,F8 for 2#)
Temperature sensor of the IGBT failure.
F9/FA
(short circuit/open circuit for 1#)
Temperature sensor of the IGBT failure.
FC/FD
(short circuit/open circuit for 2#)
2) Specific Failure & Solution
Failure
The LED does not come on
when unit is plugged in.
Some buttons can't work, or
the LED display is not normal.
The Cooking Mode Indicator
comes on, but heating does
not start.
EN - 18
Copyright © 2019, Fast ČR, a. s.
Problem
No Auto-Recovery
Problem
No power supplied.
The accessorial power
board and the display
board connected failure.
The accessorial power
board is damaged.
The display board is
damaged.
The display board is
damaged.
High temperature of
the hob.
There is something
wrong with the fan.
The power board is
damaged.
Solution
Check the connection or replace the
ceramic plate temperature sensor.
Replace the power board.
Solution A
Check to see if plug
is secured tightly in
outlet and that outlet is
working.
Check the connection.
Replace the accessorial
power board.
Replace the display
board.
Replace the display
board.
Ambient temperature
may be too high. Air
Intake or Air Vent may
be blocked.
Check whether the fan
runs smoothly;
if not, replace the fan.
Replace the power
board.
Solution B
Revision 05/2020