Philco PHD 302 Owner's Manual page 13

a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're not
selecting any cooking zone.
Set the time by touching the "-" or "+" control of the
timer
Hint: Touch the "-" or "+" control of the timer to decrease
or increase by 1 minute once.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
Touching the "-" and "+" together, the timer is cancelled,
and the "00" will show in the minute display.
When the time is set, it will begin to count down
immediately. The display will show the remaining time
and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer indicator
shows "- -" when the setting time finished.
b) Setting the timer to turn one cooking zone off
Select a heat setting by touching the "-" or "+" control
that you want to set the timer for.
Touch timer control, the minder indicator will start
flashing and "10" will show in the timer display.
Set the time by touching the "-" or "+" control of the
timer
Hint: Touch the "-" or "+" control of the timer once will
decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer will
decrease or increase by 10 minutes.
Copyright © 2019, Fast ČR, a. s.
Set one zone
EN - 11
Revision 05/2020