Input Usb Id; Check Usb Id - Epson PH890 Service Manual

EPSON Stylus Photo 890/1290

5.3.3.1 Input USB ID

1. Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -131)
2. Select USB ID from the main menu.
3. The USB ID Adjustment items window appears. Select Input USB ID .
Figure 5-33. Input USB ID Selection
4. Input a10-digit serial number and click
Figure 5-34. USB ID Input Window
ADJUSTMENT
. The new USB ID number is displayed.
OK
Individual Adjustment Program
5. To exit or continue the program, click Quit on the lower left. Refer to Figure
5-17."Exit Window" on page -133.

5.3.3.2 Check USB ID

1. Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -131)
2. Select USB ID from the main menu.
3. The USB ID Adjustment items window appears. Select Check USB ID and click
OK.
Figure 5-35. Check USB ID Selection
Revision B
140