Input Bi-D Adjustment Value - Epson PH890 Service Manual

EPSON Stylus Photo 890/1290
8. The following message appears on the window and the Bi-Directional
Adjustment Pattern Printing is completed.
Figure 5-26. Bi-Directional Adjustment Pattern Printing Completed
9. To exit or continue the program, click Quit on the lower left. Refer to Figure
5-17."Exit Window" on page -133.

5.3.2.1 Input Bi-D Adjustment Value

1. Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -131)
2. Select Bi-D from the main menu.
ADJUSTMENT
3. The Bi-Directional Adjustment window appears. Select Input Bi-D Adjustment
Value and click
4. The Input Bi-D Adjustment Value window appears and the current Bi-D
Adjustment values are displayed. Referring to the printout, input the setting values
using the ↑ or ↓ key or directly type it in.
Individual Adjustment Program
OK .
Figure 5-27. Bi-Directional Adjustment Window
Figure 5-28. Input Bi-D Adjustment Value Window
Revision B
137