EPSON EPL-5900/EPL-5900L
5.2 USB ID Input
EPL-5900/EPL-5900L comes with the USB interface as standard, and the PC
connected to the EPL-5900/EPL-5900L via the USB interface identifies the printer by
referring to the USB ID information specific to each printer.
Since this USB ID information is stored on EEPROM on the MAIN Board of the
printer, you have to re-define the ID information by the procedure described below
when you have replaced the MAIN Board for repair.
When you repair the printer and re-define the USB ID
C A U T I O N
information, you have to tell the user to uninstall the previously
installed printer driver as it is referring to the old USB ID
information.
The program for USB ID input and the supported operating environment are as
follows:
Program
USBID_EJL.exe
Operating environment
OS: .................... Windows95 OSR2.0 or later or Windows98
Port used:............ LPT1 ∼ LPT3 (Windows95/98)
Adjustment
5.2.1 Installation Procedure for Program
Copy the adjustment program file (USBID_EJL.exe) onto the desktop or into a folder.
5.2.2 Procedure for Program Operation
Do not start the adjustment program before connecting the
C A U T I O N
parallel cable to the printer.
This program can not be executed together with EPW (Epson
Printer Window) on Windows 95/98. Be sure to terminate the
EPW before starting the adjustment program.
If the power to the printer is turned off or the parallel cable is
disconnected during running of the adjustment program, be
sure to restart the program.
On the "Details of Display" tab of "Property of Screen", do not
change "font size."
1.
When you execute the program "USBID_EJL.exe", the menu window shown below
will appear.
2.
Select the model name "EPL-5900/EPL-5900L", then click the OK button.
Figure 5-1. Program Start Window
USB ID Input
Revision B
123