Epson PH890 Service Manual page 136

EPSON Stylus Photo 890/1290
5. The Bi-Directional Adjustment patterns are printed as follows.
Figure 5-23. First Bi-Directional Adjustment Pattern Sample
NOTE: To save sheets of paper during Bi-D Pattern Printing, you can set an initial
printing start position by using the track bar on the window. The printing start
position can be determined according to the track bar you set. With this function,
you can print out the Bi-D Adjustment Patterns twice on an A4 size sheet. (Refer
to Figure 5-25)
ADJUSTMENT
6. During the adjustment printing, using the track bar is recommended for the second
or later test printing to save paper. The track bar can be set to 8 levels. For the
second printing, however, setting the bar to the right end is recommended. After
setting the bar, click OK.
Figure 5-24. Second Bi-Directional Adjustment Pattern Printing
7. The second Bi-D Adjustment Patterns are printed as follows.
After First Pattern Printing
Figure 5-25. Second Bi-Directional Adjustment Pattern Sample
Individual Adjustment Program
Revision B
Set the track bar to
the right end.
The second print
start position
After Second Pattern Printing
136