Epson PH890 Service Manual page 116

EPSON Stylus Photo 890/1290
4. Set SCALE, PF onto BRACKET, SCALE with its front side facing downward.
Set the scale's front side
facing downward.
Tool (Code: 1051765)
Figure 4-61. Attaching SCALE, PF
n
Do not touch the following areas:
C A U T I O N
- Inner side of the SCALE, PF's shaft hole through which the
PF Roller Shaft is installed.
- Printed face of SCALE, PF
n
If BRACKET, SCALE is not aligned with the circle printed on
SCALE, PF, it should not be a problem.
DISASSEMBLY AND ASSEMBLY
SCALE,
Tool
(Code: 1051765)
5. Remove the base sheet of TAPE, D50 and stick it to SCALE, PF.
Protection Sheet
SCALE,
Tool (Code: 1051765)
n
If TAPE, D50 is not aligned with the circle printed on SCALE,
C A U T I O N
PF, it should not be a problem.
6. Peel off the protection sheet from TAPE, D50 on SCALE, PF.
Disassembly Procedures
TAPE, D50
Figure 4-62. TAPE, D50 Installation
Revision B
Protection Sheet
116