Table of Contents
Advertisement
INSTRUCTION PICTURE:
CARBON
BRUSH
MOTOR
LED
WARNING
While working with this tool, the dust caused can be dangerous to one's health:
While working with a sander always wear eye protection and a dust mask.
Do not work with material containing asbestos. Asbestos is known to cause cancer.
Special caution while sanding material containing lead:
All persons, that are working with the machine or entering the workspace, must wear a special mask for
protection from lead colors and steam.
Children and pregnant women are not allowed to enter the workspace.
At the workspace, it is not allowed to eat, drink or smoke. Contact with or inhaling of the sanded dust (for
ex. Lead-based coating material) can cause the user and others present damage to their health.
YOU SHOULD ALWAYS
Always wear proper size personal protection equipment such as a dust mask and use while sanding with
a dust bag.
The power cable must be kept away from the moving parts of the machine.
Wear protection goggles, especially while sanding above one's head.
ABRASIVE DISC SELECTION
The Drywall Sander is shipped with 6pcs of sanding paper ((80/100/120/150/180/240grit). This abrasive
is suitable for most applications. Abrasive discs of 120 grit and 240 grit are available for situations
requiring a smoother finish.
INSTALLATION
Before the repair or replacement parts, electric tool accessories, be sure to pull out the plug from
the socket
THE REPLACEMENT OF ABRASIVE SANDING PAPER
Before installing the new sanding paper, must first clear up the sanding disc, such as the use of brush.
Sanding pad has a layer of cloth; it can quickly and easily install flocking self-adhesive sandpaper. Place
the new sanding disc accurately onto the sanding pad. Press it firmly by hand into place.
SPEED
ON/OFF SWITCH
ADJUSTER
PIPE
LED SWITCH
DUST BAG
Advertisement
Table of Contents
