H3C S3100 Series Operation Manual page 28

Operation Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Table 4-7 Commonly used pluggable transceivers
Transceiver type
SFP (Small
Form-factor
Pluggable)
GBIC (GigaBit
Interface
Converter)
XFP (10-Gigabit
small Form-factor
Pluggable)
XENPAK (10
Gigabit EtherNet
Transceiver
Package)
Note:
For pluggable transceivers supported by S3100 series Ethernet switches, refer to H3C
S3100 Series Ethernet Switches Installation Manual(For Soliton).
II. Identifying pluggable transceivers
As pluggable transceivers are of various types and from different vendors, you can
perform the following configurations to identify main parameters of the pluggable
transceivers, including transceiver type, connector type, central wavelength of the laser
sent, transfer distance and vendor name or vendor name specified.
Table 4-8 Identify pluggable transceivers
Display main parameters
of the pluggable
transceiver(s)
Display part of the
electrical label information
of the anti-spoofing
transceiver(s) customized
by H3C
Applied
environment
Generally used for
100M/1000M
Ethernet interfaces
or POS
155M/622M/2.5G
interfaces
Generally used for
1000M Ethernet
interfaces
Generally used for
10G Ethernet
interfaces
Generally used for
10G Ethernet
interfaces
Operation
display transceiver
interface [ interface-type
interface-number ]
display transceiver
manuinfo interface
[ interface-type
interface-number ]
Whether can be
an optical
transceiver
Yes
Yes
Yes
Yes
Command
4-4
Chapter 4 Device Management
Whether can be
an electrical
transceiver
Yes
Yes
No
Yes
Description
Available for all pluggable
transceivers
Available for anti-spoofing
pluggable transceiver(s)
customized by H3C only