Specifying The App To Be Used At Reboot; Upgrading The Boot Rom; Identifying And Diagnosing Pluggable Transceivers - H3C S3100 Series Operation Manual

Operation Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Caution:
Enabling of this function consumes some amounts of CPU resources. Therefore, if your
network has a high CPU usage requirement, you can disable this function to release
your CPU resources.

4.2.5 Specifying the APP to be Used at Reboot

APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be used when the switch
reboots.
Table 4-5 Specify the APP to be used at reboot
Operation
Specify the APP to be
used at reboot

4.2.6 Upgrading the Boot ROM

You can use the Boot ROM program saved in the Flash memory of the switch to
upgrade the running Boot ROM. With this command, a remote user can conveniently
upgrade the BootRom by uploading the Boot ROM to the switch through FTP and
running this command. The Boot ROM can be used when the switch restarts.
Table 4-6 Upgrade the Boot ROM
Operation
Upgrade the Boot ROM

4.2.7 Identifying and Diagnosing Pluggable Transceivers

I. Introduction to pluggable transceivers
At present, four types of pluggable transceivers are commonly used, and they can be
divided into optical transceivers and electrical transceivers based on transmission
media as shown in
boot boot-loader [ backup-attribute ]
{ file-url | device-name }
boot bootrom { file-url | device-name }
Table 4-7.
4-3
Chapter 4 Device Management
Command
Command
Description
Required
Description
Required