Scheduling A Reboot On The Switch; Configuring Real-Time Monitoring Of The Running Status Of The System - H3C S3100 Series Operation Manual

Operation Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Table 4-2 Reboot the Ethernet switch
Reboot the Ethernet switch

4.2.3 Scheduling a Reboot on the Switch

After you schedule a reboot on the switch, the switch will reboot at the specified time.
Table 4-3 Schedule a reboot on the switch
Schedule a reboot on the switch,
and set the reboot date and time
Schedule a reboot on the switch,
and set the delay time for reboot
Enter system view
Schedule a reboot on the switch,
and set the reboot period
Note:
The switch timer can be set to precision of one minute, that is, the switch will reboot
within one minute after the specified reboot date and time.

4.2.4 Configuring Real-time Monitoring of the Running Status of the System

This function enables you to dynamically record the system running status, such as
CPU, thus facilitating analysis and solution of the problems of the device.
Table 4-4 Configure real-time monitoring of the running status of the system
Enter system view
Enable real-time
monitoring of the running
status of the system
Operation
Operation
Operation
system-view
system-monitor enable
Command
reboot [ unit unit-id ]
Command
schedule reboot at hh:mm
[ mm/dd/yyyy | yyyy/mm/dd ]
schedule reboot delay
{ hh:mm | mm }
system-view
schedule reboot regularity at
hh:mm period
Command
4-2
Chapter 4 Device Management
Description
Available in user view
Description
Optional
Optional
—
Optional
Description
—
Optional
Enabled by default.