Front Runner SLIMLINE II Manual page 5

3 FIT AND SECURE
3.2
2.2
3.3
Center the rack and tighten fully. Finish off by placing M8 Nut Caps over the M8 Nyloc Nuts.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
5
Now's the time to visit your favorite Front Runner Dealer in person or online.
FRONT RUNNER RACK KITS OFTEN HAVE A HIGHER LOAD RATING THAN THE VEHICLES THEY ARE MOUNTED TO. PLEASE REFER TO YOUR SPECIFIC VEHICLE MANUFACTURER
FOR A RECOMMENDED ROOF RATING. FRONT RUNNER CANNOT BE RESPONSIBLE FOR IMPROPER LOADING BEYOND THE VEHICLE MANUFACTURER'S STATED LOAD CAPACITY.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
KRFE004T_REV_A00
4
IMPORTANT!
Share your adventures on:
Place your Tray on the vehicle
positioning all the feet so that they rest
on top of the roof rails.
Position the LH and RH front Grab On
Feet as shown.
Fully tighten all the M6x50 Cap Screws
13mm
to secure the Tray onto the rails.
Refit the Front Cover Plates.
5
Tightening Torque 6Nm
Make sure there are no movement on
the rack after fully tightening all the
fasteners.
© 2020 FRONT RUNNER VEHICLE OUTFITTERS