Table of Contents
Advertisement
4. NAMES OF THE PARTS
1)
No.
Name
1) Display section
Operator detect sensor
2)
(A985GOT only)
3) Reset button
4) Memory card access switch
5) Memory card LED
6) Communication module interface
7) Memory card interface
8) Memory card ejection button
9) Speech output terminal
10) Slot cover
11) Printer interface
12) RS-232C interface
13) CRT interface (A985GOT only) For CRT connection
14) Option module interface
15) Terminal block
16) Communication board slot
17) Memory board slot
Screw hole for attaching
18)
memory board
19) Mounting fixture fitting portion
20) Protective ground terminal *
21) Rating plate
* This is attached to the model of which case is mode of conductive metal.
19)
2)
21) 3) 4) 5)
6)
20)
13)
12)
11)
15)
14)
19)
Shows the screen
Sensor that detects Operators
Used to reset the hardware of the GOT
Used to set the condition of access to the PC card when it is
loaded during power-on (Factory-set to OFF)
OFF: Access from GOT to PC card inhibited
ON: Access from GOT to PC card enabled
Indicates whether the PC card may be loaded/unloaded or
not
Off: PC card may be loaded/unloaded
(When switch 4 is OFF)
On: PC card must not be loaded/unloaded
(When switch 4 is ON)
Interface for loading the communication module
Interface for loading the PC card
Button used to withdraw the PC card
For external speaker connection
Fixture to cover the slot
For printer connection
For connection of personal computer
For connecting the bar code reader
For option module loading
For power input and external output
Slot for communication board loading
Slot for memory board loading
Screw hole used to attach the memory board
For mounting fixture fitting
For earthing (For safety, please make sure to ground this terminal.)
18
19)
7) 8)
When 10) is removed
10)
9)
19)
Description
-
17)
16) 18)
Advertisement
Table of Contents
