When The Communication Board/Module Is Used - Mitsubishi GOT MELSEC A985GOT-TBA-EU User Manual

POINT
Hardware version
The GOT hardware version is located on the rating plate at the rear of
the GOT.
(The products including a CE mark logo on the rating plate and packing
boxes are compliant with EMC Directive.)
Connected devices
If connecting to the PLC or microcomputer other than Mitsubishi
products (MELSEC-Q series, MELSEC-QnA series or MELSEC-A
series) please refer to the EMC Directive compliance manual for that
specific device.

2.2.2 When the communication board/module is used

Use the following communication boards/module with the GOT to ensure
compliance with the EMC Directive.
The GOT does not comply with the EMC Directive when connected with
other than followings.
Connection method
Bus connection
RS-232C
communication
CPU direct
connection
RS-422
communication
RS-232C
Computer link communication
connection
RS-422
communication
CC-Link connection
Ethernet connection
Microcomputer
RS-232C
connection
RS-232C
Other PLC communication
connection
RS-422
communication
GRAPHIC OPERATION TERMINAL
A960GOT-EBA-EU
MODEL
IN 100-240VAC 50/60Hz POWER MAX115VA
DATE 0105LR
LISTED 80M1
IND. CONT. EQ.
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN BD992C082H01
CE mark logo
A9GT-BUSS (Hardware version C or later)
A9GT-BUS2S (Hardware version C or later)
A9GT-RS2 (Hardware version B or later)
A9GT-RS2T (Hardware version C or later)
A9GT-RS4 (Hardware version B or later)
A9GT-RS2 (Hardware version B or later)
A9GT-RS2T (Hardware version C or later)
A9GT-RS4 (Hardware version B or later)
A8GT-J61BT13 (Hardware version E or later)
A9GT-J71E71-T (Hardware version C or later)
A9GT-RS2 (Hardware version C or later)
A9GT-RS2T (Hardware version C or later)
A9GT-RS2 (Hardware version B or later)
A9GT-RS2T (Hardware version C or later)
A9GT-RS4 (Hardware version B or later)
L R
Hardware version
Communication board/module
11