Setting The Camera's Operational Mode; Taking A Picture; Taking Pictures With The Viewfinder - Concord Camera Eye-Q 4062AF User Manual

GETTING STARTED / TAKING A PICTURE

SETTING THE CAMERA'S OPERATIONAL MODE

The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.
A
To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
A
AWB
⁄
AWB
⁄ ⁄
Camera Mode
Use the camera mode to
take pictures or to customize
your camera settings for
picture taking.
TAKING PICTURES

TAKING PICTURES WITH THE VIEWFINDER

fig.1.1
1. Turn the camera on.
2. Set the camera to (
The LCD can be switched off to save battery power by pressing the (
3. Frame the subject in the viewfinder. (fig.1.1)
4. Press the Shutter button half-way to activate the auto-focus until the green AF LED stops blinking.
• The camera will automatically determine the right focus, and a rapid click sound can be heard.
Note: For more information on Focus Lock, please go to page 11. To change AF mode, please refer to p. 24.
5. Press the Shutter button fully to capture the image. (fig.1.3)
A
• The camera will make a click sound.
• The camera will beep when the image is captured.
AWB
• When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that
the image is being stored.
⁄
Review Mode
Use the review mode to
browse through images and
video clips, to delete images
and video clips, to play a
slide show, or to transfer
the images/video clips from
the internal memory to the
SD card.
4 M
28/45
A
fig.1.2
AWB
) Camera Mode.
A
AWB
A
AWB
9
Video Clip Mode
Use video clip mode to
capture video clips with
sound or to customize your
camera settings for video clip
recording.
A
AWB
A
AWB
4 M
28/45
A
fig.1.3
AWB
) button.
A
AWB
A
AWB