Setting The Date And Time; Setting The Camera Mode - Concord Camera 5040 User Manual

PREPARING THE CAMERA

SETTING THE DATE AND TIME

The setting Date/Time screen will pop up when powering the camera on for the first time or when the batteries
are removed for an extended time.
1. Press or to select a field to change.
2. Press or to set the values.
3. After the Date and Time is set, press the SET button to confirm the
settings and to exit.
To adjust Date/Time or to change Date/Time format:
1. Press the MENU button.
2. Press to select the Setup Menu.
3. Press or to select Date & Time then press the SET button or
4. Follow steps 1-3 in the above section to set Date, Time and or Date/Time format.

SETTING THE CAMERA MODE

Press the MODE button to change camera mode.
Shooting Mode
Video Mode
Voice Mode
Review Mode
The camera mode changes as shown in the following diagram when the MODE button is pressed.
Shooting Mode
For shooting still images
For shooting video clips.
For recording audio clip.
For viewing the recorded images, video clips and or audio clips.
Video Mode
9
to enter its submenu.
Voice Mode
07/25/2004 21:45
MM/DD/YY
Play Mode