Table of Contents
Advertisement
SOFTWARE INSTALLATION GUIDE
INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98/98SE
NOTE: Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9
installation is completed.
Step 1
Make sure your camera is not connected to the computer.
Step 2
Make sure the computer is powered on and Windows 98 or 98SE is running.
Step 3
Close any other applications or software you may be running.
Step 4
Insert the supplied CD-ROM into your computer's CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on "My Computer" either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Select the language. Click [OK].
Step 6
The installation
screen will
appear. Click on
Install Camera
Drivers.
Step 7
Click [Next >].
Step 8
The next dialog will prompt you
to select the components that
will be installed. USB Mass
Storage Driver and DirectX 9
will be preselected.
The files will be saved in the
Concord Eye-Q 4062AF/
5062AF directory automatically.
OR
You may change the default folder by clicking [Browse...] and selecting a different folder in
your computer.
Click [Next >].
49
Advertisement
Table of Contents
