SETTING THE CAMERA'S OPERATIONAL MODE
The camera has 3 operational modes Camera Mode, Review Mode and Video Clip Mode.
1. To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
A
A
AWB
AWB
⁄
⁄
⁄
⁄
Camera Mode
Use the camera mode
A
setting to take pictures or to
customize your camera
AWB
⁄
⁄
settings for picture taking.
SINGLE SHOT
Taking a Picture with the Viewfinder
Taking a picture with the viewfinder:
1. Turn the camera on.
• The LCD can be switched off to conserve battery power by pressing the (
2. Frame the subject in the viewfinder.
3. Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (For
information on Focus Lock, please go to page 12) (fig.1.1)
• The camera will focus the lens at different distances to find the correct focus range, and you will hear a
rapid click sound from the camera.
4. Press the shutter button fully to capture the image. (fig.1.2)
• The camera will beep when the image is captured if sound is activated.
• The camera will make a click sound.
• When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that
the image is being stored.
A
AWB
⁄
⁄
A
A
AWB
AWB
⁄
⁄
⁄
⁄
A
AWB
⁄
⁄
Review Mode
Use the review mode
setting to browse through
images and video clips or
to delete images from the
internal memory or
memory card.
4
M
A
28/45
A
AWB
N
fig.1.1
⁄
⁄
AWB
⁄
⁄
A
A
AWB
⁄
⁄
AWB
⁄
⁄
10
GETTING STARTED / TAKING A PICTURE
Video Clip Mode
Use video clip mode to
capture video clips.
Note: No sound will be
recorded.
A
A
AWB
⁄
⁄
AWB
⁄
⁄
4
M
28/45
A
AWB
N
⁄
⁄
fig.1.2
) button.
A
AWB
⁄
⁄
A
AWB
⁄
⁄
Need help?
Do you have a question about the Eye-Q 4360z and is the answer not in the manual?