Table of Contents
Advertisement
About Flash Ready LED
A
AWB
⁄
⁄
Note: Do not power the camera off or change camera mode while the camera is capturing or storing a picture
or a video clip. Otherwise, the picture or video clip may become corrupted.
TAKING PICTURES WITH THE LCD
AWB
fig. 1.1
1. Set the camera to (
2. Frame the subject in the LCD. (fig.1.1)
3. Press the shutter button half-way to activate the auto-focus lock until the green AF LED stops blinking and
the AF frame turns green. (fig.1.2)
• The camera will automatically determine the right focus, and a rapid click sound can be heard.
Note: For more information on Focus Lock, please go to p. 11. To change AF mode, please refer to p.24.
4. Press the shutter button fully to capture the image. (fig.1.3)
• When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that
the image is being stored.
• A preview of the image will be displayed on the LCD for 1 second. To change the preview interval, please
refer to p.42.
• The picture counter number displayed in the LCD will be updated.
5. If you are not satisfied with the image, you may simply press (
saved. For details, please refer to p.30.
A
AWB
Steady
The camera is capturing
a video clip or storing a
picture or a video clip.
3
M
28/45
A
AWB
) Camera Mode.
A
AWB
AWB
A
AWB
4
M
28/45
A
fig. 1.2
2
5
10
30
A
10
TAKING A PICTURE
Blinking
The flash is recharging, or
LCD is auto powered off.
A
AWB
A
AWB
4
M
28/45
A
fig. 1.3
AWB
) button to delete the image before it is
A
AWB
A
AWB
Advertisement
Table of Contents
