SOFTWARE INSTALLATION GUIDE
FLOW DIAGRAM FOR SOFTWARE INSTALLATION
To transfer the pictures and video clips from internal memory or the memory card, the camera must be
connected to a computer with the provided Mini-USB cable. Additional setup may be required by some
operating systems before connecting the camera to the computer for the first time.
Windows
98/98SE
Installing the USB
Mass Storage Drivers
and DirectX 9 p.49
Installing ArcSoft PhotoImpression 2000 (if needed) p.52
Installing Adobe Acrobat Reader 5 (if needed) p.54
Data transfer may not function correctly if you have one of the operating systems listed below or you are using
an add-on USB adapter or USB hub.
•
Windows 95
•
Windows NT 3.51/4.0
•
Mac OS 8.6 or lower.
•
Home built computer systems or computer systems without a factory installed operating system.
•
Home installed operating system or upgrade to the operating system.
Identifying your operating system
Windows 2000
Professional
Installing
DirectX 9 p.51
Connecting the camera to the computer p.56
Downloading pictures and video clips onto the computer p.56
Disconnecting the camera from the computer p.58
Windows
Me/XP
47
Mac OS
9.x/10.x