Bajaj GT 125X Service Station Manual page 55

IMPORTANT SOP
Clutch side parts assembly
Service Station Manual
• Assemble rotor key, rotor assembly with one way
clutch & gear starter clutch on crankshaft
assembly.
• Apply Loctite 243 to rotor mounting nut. Using
rotor holder, prefit rotor mounting nut with thick
spacer & tighten to recommended torque(5 – 5.5
Kgf-m).
• Fit gear starter clutch stopper plate mounting
screw
• Assemble starter motor. Prefit starter motor
mounting bolts & tighten to recommended
torque.
Fit starter motor cable ring terminal followed by
plain washer, spring washer & 10 mm nut &
tighten as per recommended torque.
• Fit rubber boot properly covering the starter
motor terminal.
• Assemble special bolt guide chain slack side with
chain guide. Apply Loctite 243 to special bolt
guide. Prefit special bolt guide & tighten to
recommended torque (1 – 1.1 Kgf-m).
• Fit cam drum change location pins (4 nos)
51 Service Support - M/C