Bajaj GT 125X Service Station Manual page 42

IMPORTANT SOP
Service Station Manual
• Remove cylinder head mounting bolts (4Nos)
with 12 mm spanner in criss-cross pattern.
Skill tip: While removing Cylinder head mounting
bolt H (RH side rear bolt) as shown in
photograph, tilt bolt H slightly towards RH side
and remove the bolt.
• Take out plate cylinder head.
• Using rocker arm shaft removing tool, remove rocker arm shaft of both inlet & outlet side.
• Take out rocker arm (2 nos).
• Remove camshaft circlip.
• Tale out camshaft.
• Remove Oxygen sensor coupler connection.
• Remove Silencer mounting bolt on RH stay by
using 8 mm allen key.
• Take out silencer assembly.
• Take out Cylinder head assembly.
• Take out cylinder head gasket.
38
H
Service Support - M/C