IMPORTANT SOP
Service Station Manual
• Insert the rubber bellow with clamp. Fit rubber
bellow in groove on outer tube. Tighten rubber
bellow mounting clamp screw with phillips head
screwdriver.
• Fit fork leg assembly on vehicle
• Prefit fork top bolt, under bracket bolt & tighten to
recommended torque.
Torque value :
Fork top bolt : 3 - 3.5 Kgf-m
Under bracket bolt : 2.5 - 3 Kgf-m
• Insert front axle through both leg assemblies & ensure that it is free in both outer tube
holes. If axle is not free, adjust leg assembly accordingly.
• Take out front axle.
• Prefit front fender mounting bolts & tighten to recommended torque.
Torque value : 1.8 - 2 Kgf-m
100
Service Support - M/C