Bajaj GT 125X Service Station Manual page 102

IMPORTANT SOP
Service Station Manual
• Insert fork inner pipe, cap oil lock & outer tube.
• Fit new copper washer. Pre-fit outer tube bottom bolt & tighten using 6 mm allen key.
Torque value : 1.5 – 2.5 Kgf-m
• Hold fork leg assembly with seat pipe holder as shown in photograph & take out seat pipe
holder.
• Assemble new oil seal as shown in photograph.
Notes about oil seal :
• Never reuse oil seal.
• Always replace the fork oil seal along with dust seal of same manufacturer.
• Front fork oil seal fitment direction should be as shown in photograph.
• Using Oil seal fitment driver (Part No : 37174030) & oil seal driver (Part No – 37174034),
fit the oil seal.
98 Service Support - M/C