IMPORTANT SOP
Service Station Manual
• Remove Lense, Gasket, Bulb taillamp & reflector as explained in "Bulb Taillamp / Lense
with gasket / Reflector Replacement SOP".
• Insert 15 mm spanner through indicator harness branch & remove indicator mounting
nuts.
• Remove nut from indicator harness branch &
take out indicator. Similary remove other
indicator also.
• Take out bracket indicator mounting.
• Remove housing taillamp mounting nuts (2 Nos) with 4 Nos metal washers using 10 mm
spanner.
• Take out housing taillamp with wire holder.
156
Service Support - M/C