Bajaj GT 125X Service Station Manual page 49

IMPORTANT SOP
Engine Assembly
Service Station Manual
• Remove output shaft bearing from RH crankcase using bearing extractor tool.
Skill tips before crankcase assembly :
• Engine oil passages:
- Ensure that oil passages are clear by pumping
engine oil into passage.
- Apply low compressed air through the oil
passage in reverse direction of oil flow for
cleaning.
• Cleaning of all jets in engine.
- During Engine overhaul, always clean all jets in engine by applying low pressure are in
direction opposite to engine oil flow.
Gaskets / O Rings / Oil seals replacement
• Always replace gaskets / O rings / Oil seals with new one whenever engine is dismantled
Foreign particles free engine parts :
• Ensure all the foreign particles are removed from engine parts
Lubrication of engine parts :
• Lubricate gears/Shafts/Bearings/Block piston assembly/ Camshaft/ Rotor with
recommended engine oil by rotating the parts
45 Service Support - M/C