Bajaj GT 125X Service Station Manual page 52

IMPORTANT SOP
Service Station Manual
• Fit dowels (2 nos) on crankcase.
• Fit new crankcase gasket.
Ensure crankcase face is clean before
application of new gasket.
• Fit RH Crankcase on LH crankcase.
Prefit RH crankcase mounting bolts (5 nos) as
shown in photograph & tighten to recommended
torque.
• 2 nos: Inner bolt – Black color (shown by Yellow
color).
• 2 nos: Long bolts–Outer side (shown by Pink
color)
• 1 nos: short bolt – Outer side (shown by Blue color)
• Change crankcase assembly position so that LH
crankcase is on top side.
Prefit LH crankcase mounting bolts (7 nos) as
shown in photograph and tighten to
recommended torque.
• 1 nos: Inner bolt – shown by pink color.
• 6 nos: Outer side – shown by yellow color
Note: all 7 bolts are of same size.
48 Service Support - M/C