Bajaj GT 125X Service Station Manual page 34

IMPORTANT SOP
Service Station Manual
• Remove cylinder head cover mounting bolts
(04 nos) with 8 mm spanner.
• Take out cylinder head cover.
Check TDC position.
• Align magneto rotor mark with respect to
crankcase LH mark.
• Check cam sprocket marks from RH side.
• Using cam sprocket holder tool, remove cam sprocket allen bolt with 6 mm allen key.
• Take out cam sprocket allen bolt along with washer.
• Take out Cam sprocket and collar cam sprocket.
• Tie cam chain with soft copper wire.
• Remove kick lever mounting bolt with 12 mm
spanner and take out kick lever.
30 Service Support - M/C