Bajaj GT 125X Service Station Manual page 111

IMPORTANT SOP
• Take out upper & lower bearing cage.
• Using nylon brush, clean steering cone kit by diesel & kerosine.
• Apply limaplex HTX3 grease on cone, races & bearing cage.
For removal of races from frame, petrol tank is to be removed.
• Refit all the parts in reverse order of removal.
Swing Arm Replacement
• Remove torque rod mounting nut locking clip using plier.
• Remove torque rod mounting nut using 14 mm spanner.
• Take out torque mounting nut & washer.
107 Service Support - M/C
Service Station Manual